Thursday, 12 July 2018

Is it Time to Refinish Your Wood Floors?

While wood flooring are extremely lovely and can do a great deal for your house , they can sometimes begin to wear out. Discolorations, dings, and dents do not necessarily mean that your floors need to be refinished, even the smooth, shiny floors might require a touch-up. It is very important to be able to spot when your wood floor needs to be refinished so that you could prevent permanent damage to the timber. Listed below are a couple ways that you can figure out if it is time to refinish your hardwood flooring!

Testing with Water

First, you need to find a component of your hardwood flooring which receives a whole lot of traffic. This part is likely to be the component most in need of refinishing due to the heavy use. Have a tablespoon of water and then put it onto that part of the ground, then simply watch closely. When it beads into droplets that just rest on the top of the floor, the end is fine. If the water soaks slowly into the wood, the finish is wearing thin, and you should think about having the flooring refinished soon. If the water soaks quickly into the timber, you'll want to have the floor refinished as soon as possible. Make certain you wipe up any excess water on the wood using a paper towel and repeat the test on other regions of the flooring as necessary.

Next, locate a pair of floorboards that match imperfectly and have a deep groove between them. Add a business card into this crack as far as it could go, then mark the card where the cover of the floor hits. Take the company card out and measure the crack thickness using a ruler. When it is less than 3/4 inch heavy, call the pros at Hounslow Floor Sanding to discuss your options. When a floor is refinished, it has to be sanded down. When there is not enough left to sand, the floor will have to be replaced.

No comments:

Post a comment